Fencing is priced by the linear foot plus adders for gates, terrain, and demolition, and the base rate swings hard by material: wood runs $25 to $50 per linear foot installed, chain link $15 to $35, vinyl $30 to $60, and aluminum or ornamental $35 to $75. The contractors who make money price the whole job (posts, concrete, gates, slope, and old-fence removal), not just the pretty per-foot number that gets undercut on easy runs.
Key takeaways
- Price fencing by linear foot for the base run, then add fixed adders for gates, corners, end posts, and terrain.
- Base installed rates vary widely by material: chain link $15 to $35, wood $25 to $50, vinyl $30 to $60, aluminum $35 to $75 per linear foot.
- Every gate is a mini-project. Price walk gates at $200 to $500 and drive gates higher, separate from the per-foot rate.
- Sloped ground, rocky soil, and demolition of an old fence each add real labor and belong in the quote as line items.
- Fully loaded labor for fence crews runs 1.4 to 1.7 times base wage, so never bid off raw hourly wage.
How do you price a fence by the linear foot?
The linear foot is your unit of measure, but the rate has to cover more than the panels.
Start by measuring the full run accurately, because a 10% measuring error on a 300-foot job is 30 feet of material and labor you either lose or overcharge. Then build your per-foot rate from three components: materials (posts, panels or pickets, rails, concrete, fasteners), labor (digging, setting, and hanging), and your overhead and margin.
Material choice drives the base rate more than anything else. Chain link is the cheapest to install at $15 to $35 per linear foot. Wood privacy fence runs $25 to $50 depending on picket grade and height. Vinyl runs $30 to $60. Aluminum and ornamental steel run $35 to $75. Taller fences (6-foot versus 4-foot) cost more per foot because of extra material and heavier posts.
Set your per-foot rate to hit your target gross margin, commonly 35% to 45% for fencing, after fully loaded labor and materials.
What adders belong in every fence estimate?
The per-foot rate covers straight, flat run. Real yards are never that simple, so adders protect your margin.
Gates. Every gate is a small build with hardware, bracing, and hanging labor. A standard walk gate runs $200 to $500; a double drive gate runs several times that. Price gates as separate line items, never buried in the per-foot rate.
Posts and corners. End posts, corner posts, and gate posts need more concrete and time. Some contractors fold this into the per-foot rate; others line-item corners. Either way, make sure the math accounts for them.
Terrain. Sloped ground requires stepping or racking panels, which is slower. Rocky or clay soil makes digging brutal and sometimes requires an auger or breaker. Add a terrain surcharge when the ground fights you.
Demolition. Tearing out and hauling an old fence is real labor and dump fees. Price removal separately at a per-foot or flat rate, plus disposal.
Permits and locates. Some jobs need permits and always need utility line locates before digging. Build that time into the quote.
Keeping these adders standardized across every bid is far easier when they live in a shared quoting tool than when each estimator remembers them differently.
How do you calculate your fully loaded labor cost?
Fencing is labor-intensive, so getting labor cost right is the whole game.
Your crew's wage is not your cost. Fully loaded labor is wage times a burden factor that includes payroll taxes, workers comp, insurance, and nonbillable time (drive, loading, dump runs). For fencing that burden typically lands at 1.4 to 1.7 times base wage. A $22/hr installer really costs $31 to $37 per hour.
Then estimate crew hours honestly for the whole job: material pickup and loading, layout and locates, post digging and setting, concrete cure considerations, panel hanging, gate builds, cleanup, and haul-off. A straightforward 150-foot wood privacy fence might be a two-day job for a small crew. Rocky soil or heavy slope can add a full day.
Multiply loaded labor by crew hours, add materials with your markup, add overhead and margin, and you have a bid you can defend. Bidding off the raw wage is how fencing contractors end up busy and broke.
What are the most common fencing pricing mistakes?
Bidding off the per-foot rate alone. The competitor who quotes a low per-foot number and leaves out gates, slope, and demolition looks cheaper until the change orders start. Price the whole job.
Underpricing gates. Gates are the most labor-intensive part per foot. A quote that treats a gate like ordinary fence run loses money on every opening.
Ignoring soil and slope. Rocky ground can triple your digging time. Walk the site and price the terrain you actually see.
Forgetting demolition and disposal. Old fence removal is hours of labor plus dump fees. Never give it away.
Not measuring carefully. A sloppy measurement means a material shortfall mid-job or an inflated bid that loses to a careful competitor. Measure twice.
Quoting slow. Homeowners getting three fence bids often hire the contractor who responds first and looks organized. Speed wins jobs, the same edge that helps trades attract more customers in any yard-facing service.
How do you protect margin over a full season?
Fencing is seasonal and weather-dependent, so margin discipline matters most when the schedule is packed.
Track your estimated crew hours against actual hours on completed jobs. You will quickly learn which job types you underbid, whether it is heavy-slope yards, chain link tear-outs, or custom gates, and you can correct on the next quote. Keeping that job history in one place, the way Roooster does, turns every finished job into better estimating on the next.
Also lock in your material pricing carefully. Lumber and steel prices move, and a bid built on last quarter's material cost can evaporate your margin. Re-check supplier pricing before every large bid, and put a price-validity window (commonly 15 to 30 days) on your quotes so a delayed customer does not lock you into stale numbers. This is the same repricing discipline that protects margin in every trade.
FAQ
How much does it cost to install a fence per linear foot? Installed rates vary by material: chain link runs $15 to $35 per linear foot, wood $25 to $50, vinyl $30 to $60, and aluminum or ornamental $35 to $75. Height, terrain, and gates push the total higher, so price adders separately from the base run.
How should I price gates on a fence job? Price gates as separate line items, never inside the per-foot rate. A standard walk gate runs $200 to $500 depending on material and hardware, and double drive gates cost several times that because of bracing, hardware, and hanging labor.
Do I need to charge extra for sloped or rocky ground? Yes. Sloped ground requires stepping or racking panels, and rocky or clay soil dramatically slows digging. Add a terrain surcharge when the site fights you, because absorbing that labor destroys margin on the job.
How do I calculate fencing labor cost? Multiply your crew's wage by a burden factor of 1.4 to 1.7 to cover payroll taxes, insurance, and nonbillable time, then estimate honest crew hours for the whole job including pickup, layout, digging, hanging, gates, and cleanup.
What is the biggest fencing pricing mistake? Quoting off the per-foot rate alone while leaving out gates, terrain, and demolition. Those extras carry real labor and cost, so pricing the whole job (not just the straight run) is what keeps a busy fence contractor profitable.
Ready to put this into practice?
Create estimates and invoices from your phone, and keep client and job details together in Roooster.
See how it works →